Enclosures for switchboards


Small electrical cabinets for industrial, civil and service sector up to 250 A (IP30 – IP55, from FORM 1 to FORM 2).

Their name has changed, the advantages are increasing.
Quick: the new series of electrical cabinets that replaces “Wall-mounted cabinets” series.
Better access from the front as a result of an increase in width and an easier disassembly of the frames independently fixed.
Same internal accessories available for Slim, Easy 630 and Compact series thanks to the ModularDIN™ system that enables rapidity and precision of modular circuit breakers assembly.

Main characteristics

  • Monoblock structure made of welded sheet with a thickness of 1,2 mm.
  • Degree of protection from IP31 (open version) to IP55 with blind door or transparent door with toughened glass.
  • Top and bottom completely removable.
  • Possibility of vertical connection and frame for flush mounting.
  • Installation of circuit breakers of all leading manufacturers (ABB, Schneider, Siemens, etc.).
  • Epoxy powder coating after phosphating in RAL 7035 B (other colours on request).
  • Patented and certified earth connection system.
  • Full range of internal finishing accessories to provide solutions for any requirement.
  • On request, stainless steel small cabinet.


Small cabinet

Monoblock structure made of welded sheet with a thickness of 1,2 mm.

Small cabinet with cable housing

Monoblock structure made of welded sheet with a thickness of 1,2 mm, with cable housing for cables, terminal block or busbar system.

Top and bottom

Made of sheet 1,2 mm thick, easily removable and designed for the connection of wiring channels of the best-known brands.

Cable ducting plate

Plate made of Aluzinc sheet steel with gasket. Hole compatible with all cable duct fastening systems commercially available.



  • Aesthetic continuity with the whole Lafer product range.
  • Fully assembled structure.
  • Fast plate assembly/disassembly.
  • Possibility to perform wiring directly on the plate. Mounting plate prepared for DIN supports and electrical devices supports.
  • Universal structure certified to accommodate all electrical devices available on the market. The wiring modality remains the same regardless of the devices used.
  • Accessories for horizontal or vertical cable ducts supports and terminal blocks included in the scope of the supply.
  • All accessories are compatible and interchangeable with the products of Quick, Slim, Easy 630 and Compact series.
  • Well-stocked warehouse for deliveries within 24-48 hours.
  • Maximum flexibility of use thanks to the possibility of using glass door, blind door, inner door and swivel frame.
  • Possibility of designing the structure with Fast-One configurator and calculating the overtemperature according to regulations in force.


  • Broad range of RAL shades available on request.
  • Customised drillings on request.
  • Circuit breaker kit arranged for any kind of molded case circuit breaker.
  • Certified busbar systems positioning.




Technical catalogue

Product catalogue

User guide




Design the layout with Fast-One ™

01 – Disassembly of the wiring plate and horizontal cabling

03 – Assembly of the ModularDIN™ depth 218

04 – Assembly of the ModularDIN™ depth 125

05 – Assembly of the modular panel

06 – Assembly and disassembly of LDIN rail

14 – Assembly of the ModularDIN™ for modular moulded case circuit breaker depth 125

24 – Assembly of the horizontal terminal block and PE